How to configure the BIOS?

These instructions are used to run EQuilibrium from USB flash memory.

(You do this on your own responsibility, instructions are informative)

  1. Press your computer's "On" switch.
  2. It's best to start pressing the key as soon as the computer begins to start. (You can look at your computer model's manual or online support page to confirm your computer's BIOS key)
  3. After successfully hitting the setup key, the BIOS will load.
  4. Enter the Boot menu (You'll typically use the arrow keys to go over to the Boot tab to start this process)

  5. Change the settings as follows:
    - Boot mode: Legacy Support
    - Boot priority: Legacy First
    - USB Boot: Enabled

    (Change the boot order, like this)
    USB HDD
    SATA HDD

  6. Enter the Exit menu. You will need to save and exit by using your BIOS' "Save Changes and Exit" key in order for your changes to take effect.
  7. Confirm

Change your settings carefully. When adjusting settings in your BIOS, be sure that you certain what the settings will affect. Changing settings incorrectly can lead to system or hardware failure.

If you don't know what you want to change coming into the BIOS, you probably shouldn't change anything.

There are no products to list in this category.